Products
Recessed Direct/Indirect Lighting
 |
|
The Zen is a 600 x 600 direct/indirect modular luminaire suitable for exposed grid ceilings. The
high transmission optic in the removable lens, combined with a CFL light source offers a cost effective
solution to efficient lighting. |
|
|
 |
|
The Zen Slim is a direct/indirect modular luminaire suitable for exposed grid and plasterboard
ceilings. The unusual size of the luminaire adds to its versatility giving similar performance characteristics
to that of a modular luminaire. The Zen Slim is available sizes 300 x 600 and 300 x1200. |
|
|
 |
|
This is a visually distinctive lens with a square pattern of individually circular Fresnel lenses, which provide 3D fisheye appearance. This lens makes a distinctive feature of the fitting, which is sometimes useful. The Q42 lens is also the best lens for colour mixing if required. |
|
|
 |
|
This has the Optika polarising lens with slightly lower output (up to 72%) but good glare control and high visual acuity. It is also best for robust environments, such as schools and hospitals, because this lens has the toughest construction. |
| |
|
 |
|
This has the Microprismatic lens that is highly efficient and use most often for general work areas in offices. Glare and lamp visibility are reduced by the interaction of transaxial refractions on the three layers of the lens. This offers high output (up to 79%) and neutral appearance. |
| |
|
 |
|
The Grid has a low glare appearance similar to that of a mesh diffuser, but without some of the irritations of keeping the mesh/overlay clean. The Kallista also offers higher transmission (up to 65%) than mesh diffuser products. |
| |
|
 |
|
The kallista LV is the low void ( version of the product, which also has a slightly altered aesthetic that has lower profile wings and slightly more proud (33mm) lens. The lenses themselves are the same for the standard and the usual options of air handling and different ceiling type integration are also available. |
| |
|
 |
|
The Alta has been a popular semi-recessed fitting for offices and hospitals since its introduction in 2001, but as with most mesh including products does not now meet the highest efficiency standards. However it does offer the three component (reflected/diffuse/polarised) light that many people enjoy and we are introducing some improvements in efficiency with new lens technology. |
| |
|
 |
|
A further development of the Corona, the Corona 2 has a reduced depth and increased efficiency. Once again the Corona 2 is a general use fitting, it is very suited to offices where good wall illuminance is desired. Utilises the Optika II Virtual Daylight® lens as standard, MTX lens as a option. |
| |
|
 |
|
The Agatha is a rectangular canopy recessed fitting for linear ceilings with mesh baffles either side of a central louvre or Optika LP lens. This type of fitting tends to work better in the linear form and the lens option can make for a more modern look. |
| |
|
 |
|
The I-PT has a modular full box construction indirect fitting with 2x40w lamps behind a mesh baffle. It is a low glare arrangement useful for circulation and public space. |
| |
|
Downlights
 |
|
Fusion is a range of decorative ambient downlights that can be used as an alternative to compact fluorescent (CFL) fittings. The lamp is a mini (50mm) metal halide GX10 20w discharge lamp running off a remote ballast. The surface element of the fitting is a solid colour finished glass ring that has a strong decorative feature. |
| |
|
 |
|
The Circle is a large high visual impact downlight (400mm dia.) combining ambient with feature lighting. The outer ring is a T5 circular fluorescent lamp and the inner ring can either be CFL or LEDs in a different colour. |
| |
|
 |
|
The Oslo is a range of quality fluorescent downlights with die cast aluminium bezel and high performance optics. The Low Void (LV) version requires just 100mm of free ceiling space, using cross blade louvre to reduce glare. |
| |
|
 |
|
The Oslo is quality fluorescent downlight with a die cast aluminium bezel in matt white. The high efficiency (around 71%) makes it Part L compliant and suitable for circulation space in most public buildings, offices and shops. |
| |
|
 |
|
The Oslo Asymmetric has the same high specification as the rest of this range, but is designed for wall washing applications in retail or exhibition space. |
| |
|
 |
|
The Oslo Flush Glass (FG) has a thick glass mounted within the bezel. Ideal for schools and hospital applications, there is also the lower glare fully frosted glass option, which is preferred in many locations. |
| |
|
 |
|
The Oslo Drop Glass (DG) offers the popular drop glass feature found in most projects. Apart from the die cast bezel the distinguishing feature of the Oslo DG is in the quality of the fixings and the 8mm thick glass. |
| |
|
 |
|
The Nautilus is a fluorescent downlight designed for lower glare locations, for example on the edge of working areas in offices. The drop glass has a polarising central element and an outboard glass that puts some light onto the surrounding ceiling, which smoothes the change in luminance. |
| |
|
 |
|
The Beral has been Clearvision's standard drop glass downlight for nearly 10 years. Used predominantly in offices and hospitals, it has been upgraded to the Beral 2 to make it more suited to the energy requirements of modern buildings. The Beral2 is available with the more efficient (14/17w PL-R) as well as the conventional (18/26w PL-C) compact fluorescent lamps. |
| |
|
 |
|
The Beral Mini is a small and simple vertical CFL product for areas requiring low energy lamps and less light, such as toilets, secondary circulation. However it can also be used to add variety to areas with large numbers of downlights. |
| |
|
 |
|
The standard open face cousin of the Beral, the I-BE has also had an efficiency upgrade. The I-BE 2 is now available with the new low energy lamps (14/17w PLR) although still available with the older (18/26w Pl-C) varieties as well. |
| |
|
 |
|
The I-BE Mini is single vertical CFL downlight, typically used as an alternative to halogen in toilets and secondary circulation areas. |
| |
|
 |
|
The Milan is a high quality square downlight, mainly suited for circulations space and restaurant applications where a different aesthetic to circular downlights is preferred. The striking appearance comes from the quality fixings and the thickness (8mm) of the drop glass. |
| |
|
 |
|
The Strom is another square alternative to a circular fluorescent downlight, which is ideal for a neutral appearance, especially when a planar ceiling is preferred. The low void needed and high relative efficiency makes the Strom a very practical product as well. |
| |
|
 |
|
The Wash C is an asymmetric fluorescent ceiling mounted wall washer. This is an architectural product used to create high luminance on walls either for illumination or feature lighting. The low void needed makes it useful to brighten up space that may otherwise appear underlit. |
| |
|
 |
|
The Washington is an asymmetric ceiling mounted wallwasher for linear fluorescent lamps. This type of fitting is widely used in retail, but the Washington also has an option that combines red, green and blue (RGB) lamps for coloured feature lighting. A separate system is required to control this form of lighting. |
| |
|
Accent Lighting
 |
|
This is a static LED downlighter designed for illumination purposes. It provides genuine lighting, not just accent effect, and is useful for spaces that need Part L efficiency and low maintenance. It does not have the punch of halogen, but provides a useful degree of ambient light unlike most LED products of this size. |
| |
|
 |
|
The Darkstar is a 12v halogen architectural downlighter for most applications where a low glare quality appearance is important - offices, homes, restaurants, public spaces for example. Architectural features include recessed lamp position, magnetic inner ring, chamfered bezel, matt powder paint (RAL 9010), 35 degree tilt and full rotation. |
| |
|
 |
|
The Porsche is a quality 12v halogen scoop downlight for application spotlighting of walls and features. It is manufactured from die-cast aluminium with matt white finish. The scoop feature allows almost 90 degree tilt onto a wall as well as full rotation. |
| |
|
 |
|
The Flex is a square 12v halogen downlight suited to a variety of applications - offices, public space and restaurants for example. The Flex has twin axis tilt for wall washing and feature lighting. |
| |
|
 |
|
The Galaxy is a recessed 12v halogen downlight designed for wall spot lighting applications, typically in offices, retail or restaurants. The raised position of the lamp minimises glare when tilted towards a wall. There is both 30 degree tilt and full rotation for spot lighting flexibility. |
| |
|
 |
|
The Pluton is a sealed 12v halogen downlight for bathroom and toilet areas, although it can also be useful in other areas where a sealed fitting is preferred. The sealing is rated to IP65 so it can be used in wet areas such as showers. |
| |
|
 |
|
A range of ultra low profile circular or square LED brushed stainless steel spotlights. A
low profile of 6.5mm makes them suitable for installation into ceilings, walls or
cabinets etc. The standard units are available in various chains of 3,5,8 or 20, while
the -HP (High Power) and RGB-P (pro) versions are supplied as single units. |
| |
|
 |
|
Ledline is a standard kit of 2.8lm of illumination grade LEDs, supplied with aluminium track heatsink and diffuser. This is an illumination product for lighting purposes and should not be confused with accent lighting LED strip products that only produce luminance. |
| |
|
 |
|
The Roy is a fluorescent geartray for concealed lighting applications, such as coves. The Roy has been designed with colour applications in mind and has the facility for three parallel lamps in red, green and blue to allow for a full range of colours. |
| |
|
Recessed Lighting
 |
|
Sky2 is a large format (1.2 x 1.2m) stretch membrane light module designed to be used solo or in arrays to create large luminous areas. The range has surface, recessed and suspended versions with several options of lamp combinations from standard white through Circada dynamic lighting to the FX colour changing models. |
| |
|
 |
|
The CR has been a hugely popular product for more than 10 years. Clearvision introduced the concept of Virtual Daylight? in 1997 with the CR using the Optika II polarising lens and daylight colour lamps. Only suitable for T-Grid ceilings the CR is still very popular with many customers, and is now available with an optional high output (DRS) body (to Part L) and standard with T5 high efficiency (HE) lamps. |
| |
|
 |
|
The SR is the sister product of the CR for use with most ceilings, including T-Grid. The SR has a bezel that holds the Optika II lens and is available with options to match different ceiling types. The SR is also available with a high output (DRS) body (to Part L) and standard with T5 high efficiency (HE) lamps. |
| |
|
 |
|
The Tablit was developed from the SR and has principally been used for its low void feature as it only needs 50mm above the ceiling. However the Tablit has an interesting tile like aesthetic all of its own that can be preferred. The Tablit now has a high output (DRS) body option (to Part L) and is standard with T5 high efficiency (HE) lamps. |
| |
|
 |
|
The Port is a recent addition to the Clearvision range. It is a flat lens framed fitting addressing the growing need for easy access framed fittings. The Port is suited to a range of school and hospital applications in particular alongside surface products like the Koracol. |
| |
|
 |
|
The Ion is a very popular sealed fluorescent fitting because it is unique in combining invisible fixings, IP65 rating and Virtual Daylight® technology. The clean looks of the Ion make it ideal for clinical areas, laboratories, technology areas, high grade commercial kitchens and any location where a good looking sealed fitting is required. |
| |
|
Pendant & Track Lighting
 |
|
The Centaur is an interesting version of the popular neo-industrial pendant often used for restaurants and public space. The availability of both metal halide and fluorescent options provide some design flexibility. |
| |
|
 |
|
The Centaur Deco is a fluorescent decorative luminaire suited to restaurants, break-out space and reception areas in particular. |
| |
|
 |
|
Another industrial style pendant with either fluorescent or metal halide options - not as interesting in appearance as the Centaur, but less expensive as well. |
| |
|
 |
|
Kruys is a range of premium spotlights for a quality architectural solution to exhibition and public space. Options include low voltage halogen and metal halide on either track or suspended from wire. |
| |
|
 |
|
Kruys is a range of premium spotlights for a quality architectural solution to exhibition and public space. Options include low voltage halogen and metal halide on either track or suspended from wire. |
| |
|
 |
|
Kruys is a range of premium spotlights for a quality architectural solution to exhibition and public space. Options include low voltage halogen and metal halide on either track or suspended from wire. |
| |
|
 |
|
Swing is a track based spotlight for metal halide lamps suited to exhibition and feature lighting. |
| |
|
 |
|
The XTS is a complete 3-circuit track system for lobbies, receptions, public facilities,
factories, and retail etc. XTS is an aluminium system compatible with the majority of
available european track mounted luminaires. Designed for easy surface mounting
on ceilings and walls. |
| |
|
 |
|
Accessories for the XTS 3-circuit track system. Designed for lobbies, receptions, public facilities,
factories, and retail etc. XTS is an aluminium system compatible with the majority of
available european track mounted luminaires. Designed for easy surface mounting
on ceilings and walls. |
| |
|
Suspended Lighting
 |
|
The Calyx is a premium architectural pendant for the workplace. It has up and downward emission through top and bottom lenses and efficient output (80%) from T5 linear fluorescent lamps. The thick aluminium end caps add to the overall quality appearance. |
| |
|
 |
|
The standard Vega quality suspended light fitting is a 170mm wide up and downlight fitting, mainly for offices or schools. A single 35/49/80w T5 linear fluorescent sits in a lamp chamber with aluminium extrusions either side. The optics can be either a louvre, Optika or Q42 lens. |
| |
|
 |
|
The Vega can also be combined into long continuous runs with integrated controls. The connected product (Konekt) and system product (Systeme) - including other building services- are designed by our technical department to an individual project requirement. Please refer to a sales engineer for further details. |
| |
|
 |
|
The Lana is a slim uplighter with a small element of downlight that is ideal for corridors and other public space requiring ambient rather than task light. The single T5 lamp is efficient and the slim aluminium profile is clean and architectural in appearance. |
| |
|
 |
|
The Lana Konekt can be connected together into long runs designed specifically for an individual project. This can minimise wiring drops and make for a cleaner project as well allow for sensors to be integrated. |
| |
|
 |
|
The Xeo is an unusual and interesting fitting that has a suspended square format with four normally 14w T5 fluorescent lamps. The Optics can be a neutral white diffuser, but it is more distinctive as a feature product with the Q42 fisheye lens. |
| |
|
 |
|
The Berso is a simple twin linear fluorescent (28/54w) T5 uplighter for areas such as offices and schools that wish for a predominance of uplight. The curved steel body has an area of perforation down each side to brighten the visual aspect of the fitting and soften any luminance change. |
| |
|
Surface/Suspended Lights
 |
|
The Zenon is a linear direct/indirect surface mounted luminaire. The high transmission optics in
combination with the curved reflector make the Zenon a superior luminaire in its class. Designed
for mounting to plasterboard or 24mm T-grid ceilings (via optional fixing brackets). |
| |
|
 |
|
The Chiara is a linear direct/indirect surface mounted luminaire, designed
for offices, meeting rooms or circulation space. Using the same curved,
high efficiency, optics as the Kallista range, the Chiara complements the
Kallista when used in installations requiring a mix of surface and recessed
product. Held within the two brushed aluminium endcaps, the lens is easily
removable and can be hinged down for quick lamp replacement. |
| |
|
 |
|
The Koracol is a surface/suspended* luminaire available in 600 and 1200mm formats, suitable for use in many educational, healthcare and commercial environments. Utilising the same range of lenses found within our Kallista recessed range, the Koracol is available in 4 variations; the Virtual Daylight® Optika, the high output MTX, the distinctive Q45, or the traditional Grid lens. |
| |
|
 |
|
The Sky2 is a large format (1.2 X 1.2m) membrane that creates a strong lighting appearance whilst remaining visually neutral at the same time. Each module will usually contain eight T5 28/54w lamps and these can be dimmed and of dual colour white (Circada) to mimic changing daylight as required. The square format allows the modules to be grouped into larger arrays. Recessed, surface and suspended versions are available. |
| |
|
 |
|
The Sky2 FX is a colour change product using 12 lamps in red, green and blue (RGB) fluorescent format. It is a fitting for strong lighting effect where full saturated coloured light is wanted - a much stronger colour that can saturate ambient white than with LEDs for example. The FXW uses 10 lamps of which 4 are white and 6 are RGB - this provide a better white product and more subtle colour change, but without the same power of coloured light. |
| |
|
 |
|
The Inca is a very robust IP54 surface mounted linear fluorescent product, mainly suited tor school, hospital and public space. The body is manufactured from heavy gauge steel and the Optika II lens is retained with a sealed steel frame. |
| |
|
 |
|
The CX is a general purpose surface mounted fitting that is occasionally suspended. Typical applications are with schools and hospitals. Linear T5 lamps and a Optika polarising lens are housed within a sturdy steel body to create a very practical product. |
| |
|
 |
|
The Mezzo is a versatile surface/suspended product used across a wide range of projects from offices to schools and hospitals. The steel body has a mesh baffle either side of a 'lift and tilt' Optika II lens. There is a small amount of uplight from translucent elements above the baffles. |
| |
|
 |
|
The Matrix is low profile steel linear suspended linear downlight fitting with additional uplight suited to offices. Usually it is supplied with 2x35w T5 lamps and a specular aluminium louvre optic. |
| |
|
 |
|
The I-PR is a surface mounted indirect fitting designed for lighting long narrow space such as corridors. The fitting has wide transverse distribution in the and low axial glare. The twin T5 (28/54w) lamps are concealed behind a mesh bezel and the light is kicked outwards by the curved back reflector. |
| |
|
 |
|
The Cosmo offers an improved aesthetic from a polycarbonate IP65 fitting for non-corrosive, sealed, industrial and similar space. It is offered with both standard and long life lamps and gear. It can be surface mounted or suspended. |
| |
|
 |
|
The Cosmo UP has the same features as the Cosmo except it has a translucent body that emits uplight as well as the predominant downlight. |
| |
|
 |
|
The Cosmo Silver has the same features as the Cosmo except it has a silver metallic painted body and parabolic louvre making it more suited to unusual office applications.
|
| |
|
 |
|
The BU is a range of T5 battens that can be supplied in a range of dimmable formats - DSI, 1-10v, SwitchDIM & DALI. |
| |
|
Wall Lighting
 |
|
A wall light that can also be ceiling mounted. The fittings has two T5 (40w & 22w) circular lamps giving a high output. This is useful for circulation areas that require something more effective than the usual circular wall lights. An integral emergency version is available. |
| |
|
 |
|
An attractive injection moulded thermoplastic IP44 T5 circular wall fitting available in two sizes (300 & 425mm) with a quality prism diffuser. Ideal for utility and secondary circulation space. |
| |
|
 |
|
A robust IP65 wall light for interior or exterior applications principally for schools, hospitals or public buildings. The body is die cast aluminium with a tough moulded polycarbonate diffuser and anti tamper fixings.. |
| |
|
 |
|
The Barra is a linear T5 wall uplighter with a very narrow profile in 1200mm and 1500mm. The standard body is steel in a gray paint finish. |
| |
|
 |
|
The I-PR W is a vertical wall light with good sideways throw. Two linear (14w) T5 high efficiency (HE) lamps are concealed behind a mesh baffle. |
| |
|
 |
|
The I-AN is a simple but classic steel wall uplighter with welded (without visible fixings) construction. The two sizes are 300 (2x18w) and 550mm (2x36w) the smaller making an excellent office column uplighter. |
| |
|
 |
|
The UP is a decorative commercial uplighter for offices. The spun steel bowl contains 2x13 CFL lamps and uplights a 'floating' glass disc. |
| |
|
 |
|
The Wash W is an effective floor washer when mounted recessed at low level into a wall. The CFL source gives a soft diffuse light at economic energy levels. |
| |
|
Task Lighting
 |
|
The Bill is a classic desk light with excellent design and product values from Tobias Grau. The 11w fluorescent version is also extremely practical for lighting larger desks.
|
| |
|
 |
|
The GO XT gives both direct and indirect light. Using the excellent OSA low glare optics and with 4x55w lamps it also provides a serious amount of light for offices where overhead lighting is difficult. The Go XT is available in white, black and grey and with or without an energy saving presence/constant light sensor. |
| |
|
 |
|
The Go XT Table is for mounting on desks and has conversion mounts for many leading ranges of furniture. Please check with our Technical Department for which manufacturers' desks are included. |
| |
|
Educational Lighting
 |
|
The Vega Systeme is a further development of both the Vega & Lana Konekt* systems.
Designed primarily for the illumination of teaching spaces, Vega Systeme provides power
and data containment and distribution as a more practical or economical alternative to
conventional wiring of the space. |
| |
|
Healthcare Lighting
|
|
The Barra will fit onto a wall or ceiling and provide a wash across the surface. The
asymmetric reflector shrouds the lamps from view. The narrow profile makes it ideal
as a corridor or workspace uplighter. Stainless steel finish as standard. Also available
in white. |
| |
|
|
|
The Ion is an attractive IP65 fitting with natural anodised aluminium frame without any
visible fixings. Suitable for ergonomic spaces with clean requirements - catering,
laboratories, hospitals, clean manufacturing etc. |
| |
|
 |
|
A range of bedhead lighting suitable for hospitals and retirement homes available
in two formats. BH1 provides switchable uplight, downlight or both via a 3 position
switch. |
| |
|
 |
|
A recessed, twin lamp asymmetric luminaire designed to provide an unobtrusive,
versatile lighting solution in most single and multi-bed hospital wards or care home
situations. |
| |
|
Power & Control Distribution
 |
|
The M-BOX lighting distribution system is a cost effective method of providing power and
control for lighting installations in industrial, commercial and retail buildings. |
| |
|
 |
|
V-BOX is a flexible lighting control system which provides effective power delivery
and control for lighting installations in commercial, educational, and healthcare
buildings. V-BOX is ideally suited to buildings of a fixed layout. It is designed for ease
of installation and requires little or no commissioning. |
| |
|
 |
|
Clearvision's Interconnection System is designed to make the electrical installation of
our luminaires as quick and simple as possible. Where specified, luminaires using this
system are supplied pre-wired with 0.5m flying leads terminated with T-connectors. |
| |
|
 |
|
DALI (Digital Addressable Lighting Interface) offers benefits in flexibility, energy saving
and maintenance feedback over other control protocols. Most Clearvision products can be
supplied with DALI control gear as an option (see product pages), allowing them to be
integrated into any level of DALI installation. |
| |
|
 |
|
Evolution is a versatile and highly configurable architectural rack-based control
system designed for both lighting and peripheral management. Evolution is uniquely
adaptable, making it an ideal choice for use in a vast number of applications
including shopping centres, restaurants, hotels, boardrooms, hospitality suites and
offices. |
| |
|
Emergency Lighting
 |
|
The Emstar - LED is a simple solution to the requirements for emergency lighting in non-residential buildings. The Emstar is ideal for the standby emergency lighting function – DC operation, long life, low power, and precise area coverage are all suited to LED technology. |
| |
|
 |
|
A range of unobtrusive surface/recessed exit signs available with painted steel profile
as standard, stainless steel as an option. Designed with ease of installation and
maintenance as a priority. Supplied as 3hr non-maintained unit as standard.
Available with a range of optional pictograms. |
| |
|
 |
|
An unobtrusive suspended LED exit sign available with painted steel profile as standard,
stainless steel as an option. Very low power consumption and compact size. Supplied as a
3hr non-maintained unit as standard. Available with a range of optional pictograms. |
| |
|
 |
|
The LED-EM is an compact LED based luminaire suitable for 3 hour,
non-maintained operation where an unobtrusive, self test emergency solution
is required. The unit can be surface mounted, or recessed in a 107 mm diameter
cut out, provides loop-in loop-out mains wiring facility and incorporates a 3.6v,
1.8Ah Ni-MH battery pack. |
| |
|
|
